How To Use - Anjou AJ-PCA029 Guia Del Usuario

How to Use

1. Part your hair evenly, comb it through.
2. Connect to a power source, the iron is in standby mode now .
3. Press and hold the Power Button for 0.5 seconds to turn on the iron (The default
temperature is 180 °C / 360 °F).
4. Press the Temperature + / - to adjust the temperature from 80 °C - 220 °C /
180 °F - 430 °F with an increase / decrease of 10 °C / 10 °F by each press. The
temperature on the LED display will blink three times to confirm your setting.
Hold in place for 5 to 8 seconds
5. Press and hold the Power Button and Temperature + Buttons at the same time to
change the temperature display between Celsius and Fahrenheit settings. once
changed, the temperature will turn to default setting (180 °C / 360 °F ).
6. Hold part of your hair, start at the roots (be careful not to touch the scalp), wrap
it around the barrel all the way down to hair ends.
7. Hold in place for 5 to 8 seconds, depending on the texture and length of your hair.
8. Set the curling temperature as per your hair type and volume:
Low: 80 °C - 150 °C
/ 180 °F - 300 °F
Medium: 150 °C - 190 °C
/ 300 °F - 380 °F
High: 190 °C - 220 °C
/ 380 °F - 430 °F
9. Press and hold the Power Button to turn off the iron.
Note:
This product comes with a 60-minute auto-shutoff function. It will power off
automatically after being used for 60 minutes to avoid overheating.
Caution
1. Always use the barrel stand to rest a used iron to prevent burning the surface of
your furniture.
2. Allow the iron to cool down before put it for storage.
3. Don't touch the iron when using to avoid burning.
4. Please wear the included heat-resistant glove when using the iron to protect your
hand from being burned.
5. Keep away from children.
Delicate and
thin hair
Normal hair
Coarse, thick
hair
03/04