TROUBLE SHOOTING:
If the equipment does not work like it should, please check the
points below.
PROBLEM
The YELLOW LED of
the receiver does not
light up.
The GREEN LED on
the receiver lights up,
but the relays do not
react.
The GREEN LED in the
receiver does not light
up, while the transmitter
is transmitting.
The GREEN LED in
the receiver lights up,
although the transmitter
is not transmitting.
The LED of the trans-
mitter does not light up
when you transmit.
The range of the system
is too small.
Please contact your supplier if you have tried out all solutions,
but your system still does not work properly.
POSSIBLE CAUSE
The receiver is not well
connected to the power
supply.
Incorrect power voltage
supply.
The transmitter code
has not been stored in
the receiver.
The battery in the trans-
mitter is empty.
The transmitter is
broken.
In the surrounding of
the receiver, another
transmitter is being
used on the same fre-
quency.
The battery in the trans-
mitter is empty.
The transmitter is
broken.
The battery in the trans-
mitter is almost empty.
SOLUTION
Check the connection
of the power supply.
Check the power volt-
age supply.
Program/teach-in the
transmitter code in the
receiver.
Replace the battery.
Contact your supplier.
Contact your supplier.
Replace the battery.
Contact your supplier.
Replace the battery.
7