MANUAL- ENGLISH
RECEIVER
OPERATING VOLTAGE
POWER CONSUMPTION
DIMENSIONS
PROTECTION
TEMPERATURE RANGE
COMPATIBLE TRANSMITTER
1- 'LEARN AREA' for magnet to be placed for reprogramming action
(Magnet suggestion = SPX# 1536-AA)
2- Status and power light – blinks RED when the receiver has the correct
voltage and aids with remote programming. Is GREEN when the receiver is
ready to accept UP or DOWN commands.
3- Connector – connections for power unit and incoming power
4- Mounting holes – fastener with a maximum diameter of up to 0.25" can be
used
© SPX Corporation 2011
12-24VDC
30-80mA (standby mode)
5.75" x 4.63" x 1.25" (147 x 118 x 32mm)
IP65
-30C to 70C (Humidity: 10%-90%)
SPX# 20002217
Figure 1 - receiver
Page 2 of 6
SPX# 1000499rev0