LIVARNO LSLB 24 B1 Manual De Instrucciones E Indicaciones De Seguridad página 28

LIVARNO home LSLB 24 B1
Choose the mounting position on the wall. Using
the mounting bracket (9) as a template, mark
the position of the bore holes on the wall
through the slotted holes. Drill the holes in the
wall.
Insert the dowels (13) into the drilled holes and
screw the mounting bracket (9) to the wall using
the screws (14).
Remove the rubber protective cover from the lug
(6).
Slide the power cable fixation (7) over the
power cable (8) as shown in the illustration to
the right.
26 - English