Vivanco UR 820 Manual Del Usuario página 7

All manuals and user guides at all-guides.com
2. Press SET for more than 3 seconds and
release it, when CODE SETUP is displayed.
3. Select LEARNING by pressing
keys.
4. Press OK, LEARN
displayed. Select DELETE KEY by pressing
or keys.
▼
5. Press OK, SELECT
displayed. Then press the target key, e.g.
POWER, which you like to delete.
6. SURE DELET will be displayed. Please
confirm by pressing OK. UR 820 LCD displays
SUCCESS for 1 s. Then
displayed and the next key can be deleted
according to step 5 and 6. –If the deleting fails,
WAITING and FAILED are displayed, then
repeat deleting from step 5.
7. You can stop deletion procedure by
pressing any device key (TV, DVB etc.), when
SELECT KEY is displayed.
Delete Learnt/Programmed Key Sets For
Single Devices
Please proceed as follows, see Fig. 6:
1. Press the device key of to be controlled
device, e.g. TV.
2. Press SET for more than 3 seconds and
release it, when CODE SETUP is displayed.
3. Select LEARNING by pressing
keys.
4. Press OK, LEARN
displayed. Select DELETE DEV by pressing
or keys.
▼
5. Press OK, SELECT
displayed. Then press the corresponding
device key key, e.g. TV.
6. SURE DELET will be displayed. Please
confirm by pressing OK. UR 820 LCD displays
SUCCESS for 1 s. Then
displayed and the next device key set can be
deleted according to step 5 and 6. –If the
deleting fails, WAITING and FAILED are
displayed, then repeat deleting from step 5.
7. You can stop deletion procedure by
pressing EXIT key several times.
Delete All Learnt/Programmed Keys
Please proceed as follows, see Fig. 7:
1. Press SET for more than 3 seconds and
release it, when CODE SETUP is displayed.
2. Select LEARNING by pressing
keys.
3. Press OK, LEARN
displayed. Select DELETE ALL by pressing
or keys.
▼
4. Press OK, SURE
displayed. Please confirm by pressing OK. UR
820 LCD displays SUCCESS for 1 s. Then
menu is displayed again.
5. You can stop deletion procedure by
pressing EXIT key several times.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail
UR 820 LCD UNIVERSAL CONTROLLER
Other settings
Clock Setting
or
▲ ▼
Please proceed as follows, see Fig. 8:
1.
KEY will be
release it, when CODE SETUP is displayed.
▲
2.
keys.
KEY will be
3.
displayed.
4.
displayed. Please enter time and AM or PM for
morning and afternoon. Use numerical and
SELECT KEY is
arrow keys for time input.
5.
OK. SUCCESS and later TIME SETUP will be
displayed.
6.
EXIT key several times.
Set volume control priority
With this function you can determine a device
exclusively for volume control, e.g. your audio
amplifier. Then the buttons VOL +, VOL – and
which device you are controlling.
Please proceed as follows, see Fig. 9:
1
or
▲ ▼
set CONFIGURE with the ▲ or ▼ button.
Confirm this function by pressing OK
KEY will be
2
▲
VOL LOCK with the ▲ or ▼ button. Confirm
this function by pressing OK.
DEV will be
3
amplifier and set priority=ON using the ► or ◄
button. Confirm this function by pressing OK.
4
setting mode.
SELECT DEV is
- You can cancel the priority setting using the same
procedure. Instead of ON, set OFF for all devices.
Lock Or Unlock Device Codes
1
accidentally, please proceed as follows, see
Fig. 10:Press and hold SET for 3 seconds,
then set CONFIGURE with the ▲ or ▼ button.
Confirm this function by pressing OK.
2
DEV LOCK using the ▲ or ▼ button. Confirm
this function by pressing OK.
or
▲ ▼
3
television and set lock=ON using the ► or ◄
KEY will be
button. Confirm this function by pressing OK.
▲
4
setting mode.
DELET will be
- You can cancel the lock setting using the same
procedure. Instead of ON, set OFF for all devices.
: hotline@vivanco.de
Press SET for more than 3 seconds and
Select CONFIGURE by pressing
Press OK, TIME SETUP
Press OK , TIME hh:mm xx will be
When time is displayed correctly press
You return to main menu by pressing
always control the amplifier, regardless of
Press and hold SET for 3 seconds, then
TIME SETUP appears in the display. Set
Select the device button, e.g. AUX for the
Then press EXIT several times to quit the
To prevent settings from being changed
TIME SETUP appears in the display. Set
Select the device button, e.g. DVD for the
Then press EXIT several times to quit the
, Helpline: +49 (0) 4102 231135
or
▲ ▼
will be