Function Description - B3C pesage TRANSERENITE ARX Manual De Usuario

, [lb/kg] and in order, and the instrument displays
test.
F5.2 Display screen test
All strokes of meter display will have self-inspection, to observe whether there is lacks of strokes.
Press or
F5.3 Display current internal code
The display will show internal code of current instrument after smoothing. Press
VI FUNCTION DESCRIPTION
X10 FUNCTION F2.1 = 0
How to operate:
In normal weighing mode, press
at the same time; press the key again it returns to normal weighing mode and the icon of ×10 gets off.
NOTE:
1. In net weight status, it's forbidden to change over to ×10 function status;
2. If there have been 4 decimal places, it's forbidden to change over to ×10 function status;
3. Under ×10 function status, both serial output and printing output are forbidden.
4. Under ×10 function status, it's forbidden to tare.
WEIGHT MAINTENANCE FUNCTION F2.1 = 1
Operation method
In normal weighing state, press
cation lamp is on. Only when weight setting value≥F2.2 is displayed, weight maintenance operation is effective. Otherwise, it will return to
weighing state after invalid operation information [--no--] is shown for a second.
If weight is in locked state, press
lamp is off.
If it is in weight locking state, refuse to remove skin, clear skin and setting operation.
PERCENTAGE DISPLAY F2.1 = 2
Display specification
Display [Pr 20. ], representing 20.5 %.
Pr = current actual weight / range ×100%.
Press to display switch in percentage and weight.
CHECK WEIGHT AND SELECTION SCALE FUNCTION F2.1 = 3
Function description
Set parameters such as F2.2 = A, F2.3 = B, F2.4 = C and F2.5 = D.
When display weight is X.
If X ≤ A, do not conduct check weight and selection.
If X < (B – D), it lacks of weight, and the display flickers.
to quit test of display screen.
(ONLY FOR LCD VERSION)
on the operation panel once, the display accuracy will promote for 10 times and icon ×10 gets on
on the operation panel, the will instrument lock display weight of the current scale, and "Hold" indi-
again to cancel locking of weight and return to normal weighing state, and "Hold" indication
USER'S MANUAL
, , , ,
or
TRANSERENITE ARX
and , press to quit key
to quit the interface.
11