Tally T2240/9 Instrucciones De Servicio página 10

ed into the printer.
r, make sure that the printer is switched off.
Set the Paper Thickness Adjustment Lever to the "8" position.
ess
ver
Pull the Latch Levers near the right and left ends on the Access
Cover to the front, and detach the entire Access Cover.
ever
Move the Print head to approximately the center.
head
The Print Head may be hot. So please be careful not
STOP
to touch the metal part of the Print Head.
All manuals and user guides at all-guides.com
Quick start-up