TIGEX Excellence 700 220 Instrucciones De Uso página 11

GB
OPERATING INSTRUCTIONS FOR THE BOTTLE WARMER
AT HOME OR IN THE CAR
Please read these instructions carefully before use.
Keep them close at hand so that you can refer to them later.
Device description:
(a) Baby food tray
(b) Heating accelerator ring
(c) Measuring cup
(d) ON switch
(e) Light
(f) Heating tank
(g) Mains cable
(h) Car adapter lead
(i) Switch
Technical characteristics:
Power supply
Consumption
Ambient operating temperature
Conforms to applicable European standards
For use in the home:For use in the car:
Power supply
Consumption
Ambient operating temperature
IMPORTANT INSTRUCTIONS TO BE FOLLOWED AT ALL TIMES
- Before using the appliance for the first time, check that the voltage of your electrical mains system is
compatible with it.
- The bottle warmer should always be placed on a flat and dry surface, out of reach of children. Remember!
Nothing can replace adult supervision.
- The bottles should be placed in the tank, with the ring slightly loosened
- Jars of baby food should be heated with their tops removed.
- Never turn on the appliance without having filled the tank with the required quantity of water (the water used
should be free of additives).
- Allow the bottle warmer to cool for approximately 15 minutes between uses. Never touch the inside of the tank
during or just after operation.
- Don't forget to unplug the appliance after use.
- Never submerge the appliance in water.
- In the event of a malfunction, do not dismantle the appliance even to change a damaged lead. It must be repai-
red by our after sales service department using special tools in order to avoid danger.
- This device is not designed to be used by people (including children) with reduced physical, sensorial or men-
tal capacities or people with no experience or knowledge, unless they can benefit, through a person who is res-
ponsible for their safety, from supervision or prior instructions concerning the use of the device.
Children must be supervised to ensure that they do not play with the device.
For use in the car :
- Never use the bottle warmer while the vehicle is moving. Leave your engine running when using the bottle war-
mer to avoid draining your battery.
- The car adapter lead (i) is specially designed for this Tigex bottle warmer: never use it with other appliances. Only
use the leads provided.
- Regularly check that the cigarette lighter is clean and if necessary clean it.
- If you have just used your car's cigarette lighter, allow it to cool for five minutes in the open position before plug-
ging in your bottle warmer.
All manuals and user guides at all-guides.com
AC 230V ; 50 Hz
500 W
From 7°C to 37°C
DC 12V
100 W
From 7°C to 37°C
11
(a)
(i)
(h)
(f)
(g)
(b)
(c)
(e)
(d)