Install The Driver - ICY BOX IB-DK2401AC Manual Del Usuario

Description
The USB 3.0 Display and Multi Port Docking Station is designed for extra connectivity demands. With
the docking station you can extend the connection of a Computer to more display and USB peripherals,
Ethernet network, speaker and microphone through one USB cable.

1. Install the Driver

* Caution: Do not connect the adapter to your computer before installing the driver from the deliver-
ed CD or from the download area of http://www.raidsonic.de.
Windows >7:
A. Insert the CD into the CD ROM drive.
B. The installer program will run automatically.
C. Click on "Run Setup.exe".
D. Follow the instructions and finish the driver installation.
E. Connect the adapter to a USB port on the PC.
F. Restart the PC.
G. The IB-DK2401AC is ready to be used.
MAC OS X >10.8:
A. Insert the CD into the CD ROM drive.
Run the file Mac_driver\ driver.dmg by double click.
B.
C. Follow the instructions and finish the driver installation.
D. Connect the adapter to a USB port on the mac.
E. Restart the mac.
F. The IB-DK2401AC is ready to be used.
2. Connection to Monitor/Projector
Connect the USB 3.0 cable to your notebook / PC and connect your monitor / projector to the HDMI
or DVI port.
Please setup your display settings accordingly to your operating system and requirements. For detailed
information of your operating system, see the corresponding operation manual and description of your
operating system.
NOTE: When using the HDMI
the HDMI connector will not be able to reach 4K resolutions
®
USB 3.0 BC 1.2 charging mode only available in self-powered mode.
All manuals and user guides at all-guides.com
® and the DVI connector simultaneously,
IB-DK2401AC
®