Main Standards Respected And To Respect; Responsibility Of The Manufacturer; Technical Assistance And Maintenance; Spare Parts - Palazzetti ECOMONOBLOCCO WT R Serie Manual De Instalación

1.7 Main standards respected and to
respect
Directive 2014/35 EU: "Electrical equipment
designed for use within certain voltage limits'.
Directive 2014/30 EU: "The approximation
of the laws of the Member States relating to
electromagnetic compatibility".
Directive 89/391/EEC: "Implementation of
measures to encourage improvements in the
safety and health of workers at work".
Regulation (EU) n. 305/2011 of the European
Parliament and of the Council dated 9 March
2011 , laying down harmonized conditions for
the marketing of construction products and
repealing the Directive 89/106/EEC of the
Council text with EEA relevance.
Directive 85/374/EEC: "On the approximation
of the laws, regulations and administrative
provisions of the Member States concerning
liability for defective products".
Directive 2014/53 EU: "On radio equipment
and telecommunications terminal equipment
and the mutual recognition of their conformity".

1.8 Responsibility of the manufacturer

With the delivery of this manual, Palazzetti
declines all responsibility, both civil and
criminal, direct or indirect, due to:
- installation non-complying with the existing
regulations in the country and with the safety
directives;
- partial or total non-compliance with the
instructions contained in this manual;
- installation by unqualified and/or non-trained
personnel;
- use not in compliance with the safety
directives;
- modifications and/or repairs not authorised by
the manufacturer carried out on the product;
- lack of maintenance;
- extraordinary events
1.9 Technical assistance and
maintenance
Palazzetti has a dense network of service
centres with specialized, trained and skilled
technicians.
The headquarters and our sales network is
at your disposal to direct you to the nearest
authorized service centre.

1.10 Spare Parts

Use only genuine spare parts.
Do not wait until the components are worn by
use before proceeding to their replacement.
Replace a worn component before its breaking
favours the prevention of accidents arising from
accidents caused by the sudden breakage
of components which may cause serious
damages to persons and objects.
1.11 I dentification plate
The serial number plate is placed under the
furnace on the right side of the fireplace
(accessible by raising the fire plane) and
returns all the data relating to the product,
including the data of the manufacturer, the
serial number and the brand name
The serial number must always be indicated
for any type of request regarding the fireplace.

1.12 Delivery of the appliance

The appliance is delivered perfectly packaged
and fixed to a wooden platform which allows
handling it using fork lift trucks and/or other
means.
The following material accompanies the
appliance:
- Manual for use, installation and maintenance;
- Product handbook;
- Barcode label;
- Protective glove;
- Cold handle for combustion air adjustment
opening (in the configurations where it is
required).
004778150 - 18/08/2020
.
25