SGI 1450 Guia De Inicio Rapido página 13

Changing the Boot Device Priority Temporarily
Software Issues
007-4275-001ML
During POST, you can change the boot device priority for the current boot process. The
changes described below are not retained for the next boot process.
1. Boot the server. The CD must be in the drive.
2. At any time during POST, press
appears.
3. Use the arrow keys to highlight the device from which you want the server system
to boot first. For example, if you want the server system to boot from the CD-ROM
first, you select
CD-ROM Drive
Note: One of the selections on the pop-up Boot menu is
option brings you into the BIOS setup.
4. Press .
Enter
5. The bootup process continues. When the process is finished, a system prompt is
displayed.
See the SGI 1450 Server User's Guide for additional information on configuring software
and utilities.
Changing the Boot Device Priority Temporarily
. When POST completes, a pop-up Boot menu
Esc
.
Enter Setup
. Selecting this
9