SGI 1450 Guia De Inicio Rapido página 6

SGI 1450 Server Quick Start Guide
Unpacking and Inspecting the Server
Determining Space Requirements
2
Remove the server from the packaging container and check that all accessories are
included. Inspect the packaging container for evidence of mishandling during transit. If
the packaging container is damaged, photograph it for reference. After removing the
contents, keep the damaged container and the packing materials.
Inspect the server and accessories for damage. If the contents appear damaged, file a
damage claim with the carrier immediately.
The SGI 1450 Server is designed to be either mounted in a standard 19-inch rack (rack
mode) or standing upright (pedestal mode).
For instructions on mounting the SGI 1450 Server, see the SGI 1450 Server Mounting
Instructions.
The following table specifies the space requirements for the SGI 1450 Server system.
SGI 1450 Server Physical Specification
Table 1
Specification
Height
Width
Depth
Weight
Required front clearance
Required rear clearance
Required side clearance
Rack Mode
4u (7 inches)
17.5-inch rack
26.5 inches
57 lbs. (26 kg), minimum configuration
88 lbs. (40 kg), maximum configuration
3 inches (inlet air temperature <35 °C / 95 °F)
6 inches (no airflow restriction allowed)
1 inch
007-4275-001ML