Operation - Craftsman WEEDWACKER 316.790130 Manual Del Usuario

KNOW YOUR TRIMMER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the
illustrations with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.

OPERATION

TWO SPEED
SWITCH
COUPLER
SHAFT
HOUSING
CUTTING
ATTACHMENT
SHIELD
CUTTING
ATTACHMENT
– 8 –
Air Vents
HOUSING GRIP
ASSIST HANDLE
RECESSED PLUG - is where you connect the extension
cord to the unit.
TRIGGER - used for starting and stopping the trimmer.
TWO SPEED SWITCH - used to switch between high
and low speeds for different cutting applications.
ASSIST HANDLE AND HOUSING GRIP - used to hold
the line trimmer during operation.
CUTTING ATTACHMENT SHIELD - protects operator
from thrown debris. Contains line cut-off blade to make
sure the line is not extended beyond its proper length.
Cutting attachment shield must be installed at all times
when using the cutting attachment.
CUTTING ATTACHMENT - consists of a reel housing,
reel, spring, Bump Knob, and cutting line
COUPLER - allows you to install optional attachments
on this unit.
RECESSED
PLUG
TRIGGER