Pixel Liber Manual Del Usuario página 5

USAGE
1. Turn on The Power
Push up to［ON］, the LED light is turned on according
to the relevant parameter values shown on the OLED
display. Push down to [OFF], the OLED screen and the
light will turn off.
Note:
Once turning on, the OLED display shows the memorized
parameters of the previous use, and the light works based
on these parameters.
2. Working Mode Setting
Press the adjustment dial wheel［OK］for 1 second
to cycle through CCT color temperature mode/HSI
mode/RGB mode/Scene mode.
05
USAGE
3. Color Temperature Mode Regulation (CCT)
Short press the adjustment dial wheel［OK］to set
the brightness or color temperature. Then rotate the
adjustment dial ［ ］ ［ ］to adjust brightness from 0%
to 100% (The light is off when 0% is displayed), or color
temperature from 2500K to 8500K.
CCT
100%
8500 K
4. Full-Color Gamut Mode Adjustment(HSI)
Short press adjustment dial wheel［OK］to choose from
hue adjustment /brightness adjustment/ saturation
adjustment. H-Hue: support the setting of each color in
0-765 tones. Brightness: support 0~100%. S-Saturation:
support 0~100%.
HSI
CCT
100%
8500 K
765
H
0%
S 100%
06