Time Zone Setting; Manual Time Setting - Technoline WS 9274 Manual Del Usuario

The LCD contrast can be set within 8 levels, from LCD 0 to LCD 7 (Default is LCD 4):
1. The LCD contrast level starts flashing.
2. Use the + or MIN/MAX key to select the level of contrast desired.
3. Confirm with the SET key and enter the Time Zone Setting.

TIME ZONE SETTING:

The time zone default of the weather station is "0". To set a different time zone:
1. The current time zone value starts flashing.
2. Use the + or MIN/MAX key to set the time zone. The range runs from -2h to +5h hours in 1-hour intervals.
3. Confirm with the SET key and enter the Time Reception ON/OFF Setting.
TIME RECEPTION ON/OFF SETTING
In area where reception of the DCF-77 time signal is not possible, the DCF-77 time reception function can be turned OFF. The clock will then work as a
normal quartz clock. (Default setting is "1" = ON).
1. The digit "1" will start flashing on the LCD.
2. Use the + or MIN/MAX key to turn OFF ("0" = OFF) the time reception function.
Confirm with the SET key and enter the Daylight Saving Time (DST) ON/OFF Setting.
3.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any reception of the DCF time as long as the Time Reception OFF
function is activated.
The time reception " " and the "DCF" icons will not be displayed on the LCD.
DAYLIGHT SAVING TIME (DST) ON/OFF SETTING
The daylight saving time (DST) function can be set ON/OFF. Default setting is "1" = ON:
1. The digit "1" will start flashing on the LCD.
2. Use the + or MIN/MAX key to turn OFF ("0" = OFF) the daylight saving function.
3. Confirm with the SET key and enter the Manual Time setting.
Important:
This function is only significant if the time reception setting is turned OFF "0".
Daylight saving time setting "1" (ON): the clock calculates DST automatically in normal quartz mode. DST begins on the last Sunday of March and
ends on the last Sunday of October.
Daylight saving time setting "0" (OFF): DST feature is OFF and the clock will not change time automatically.
If the time reception setting is turned ON "1", please set the daylight saving time "1" (ON): the time change will be updated by the DCF-77 signal (as
long as a proper reception is possible).
In case of daylight saving time setting "0" (OFF): the time will be transmitted by the DCF-77 signal, but the clock calculates automatically a "no-DST time".

MANUAL TIME SETTING:

In case the weather station cannot detect the DCF-signal (for example due to disturbances, transmitting distance, etc.), the time can be manually set. The
clock will then work as a normal quartz clock.
Hour flashing
1. The hour digit will start flashing.
2. Use the + or MIN/MAX key to set the hour. Keep holding the key allows the digit to advance faster.
3. Press again the SET key to set the minutes. The minute digits start flashing.
4. Use the + or MIN/MAX key to set the minutes. Keep holding the key allows the digit to advance faster
5. Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try and receive the signal despite it being manually set. When it does receive the signal, it will change the manually set time into the
received time. During reception attempts the DCF tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not appear but
reception will still be attempted the following day.
The time reception " " and the "DCF" icons will not be displayed on the LCD after manual time setting.
CALENDAR SETTING
Year
The year digits will start flashing. The range runs from 2011 to 2025 (default is 2011).
1.
Use the + or MIN/MAX key to set the year. Keep holding the key allows the value to advance faster.
2.
Press the SET key to confirm and enter the month setting mode.
3.
The month digit will be flashing. Use the + or MIN/MAX key to set the month. Keep holding the key allows the value to advance faster.
4.
Press the SET key to enter date setting.
5.
6. The date digit will be flashing. Use the + or MIN/MAX key to set the date. Keep holding the key allows the value to advance faster.
Confirm with the SET key and exit the manual setting.
7.
Note:
The weekday is automatically displayed above the time in short form (from Monday to Sunday): MO / TU / WE / TH / FR / SA / SU.
Flashing
Flashing
Flashing
Minutes flashing
Weekday
Date. Month.