Programming - A.E.B. PITAGORA 160 Instrucciones De Montaje

- Emulation for injectors from 11 ÷ 16 Ohm.
- Selection of three different types of emulation possible.
- Wiring harness fitted with original connectors having perfect interface
adaptability with injectors.
- Overlap time adjustment for petrol - gas passage.
- It is not necessary to check the injector's polarity as each injector is cut - off
and simulated singularly.
- The emulator will automatically restore the injector's
original connection should the gas electric plant present a
failure.
The PITAGORA emulator has the possibility of selecting three emulation types
by means of two switches. Configuration of latter must be modified according
to the injection type on which it must be installed.
The PITAGORA emulator is sold with a standard emulation configuration.
STANDARD EMULATION
RELEASED
RELEASED
EMULATION "A"
RELEASED
PRESSED DOWN
EMULATION "B"
PRESSED DOWN
PRESSED DOWN
18

PROGRAMMING

Technical Specifications
Configuration Adjustment
Standard Emulation: recommended for the majority
of vehicles with injectors starting from 11 ÷ 15 Ohm.
Except for: Chrysler; Hyundai; Mitsubishi
Switches Position: both released
Emulation "A" recommended for: Chrysler; Hyundai;
or on vehicles that when set with a Standard Emulation
have check - engine warning light signalling injector
error.
Switches Position: one pressed down one released
Emulation "B" recommended for: Mitsubishi;
or on vehicles that when set with a Emulation "A" have
check - engine warning light signalling injector error.
Switches Position: both pressed down Overlap time
Adjustment