Yedoo Wzoom Emoji Manual Del Usuario página 11

11.
1
2
The brake adjustment
For both the front and the rear wheel
the brake adjustment is the same. (Does
not apply for Mau / One, it has only the
rear brake)
Insert the brake cable back into the
guide (1) and check the brake pads
during braking, ensuring that their entire
surface fits tightly against the side of the
rim. If not, adjust the screw (2), which
attaches the brake pads to the shoulders
of the V-brakes. The brake pads must not
touch the tyre.
13.a
Fasten the end of the brake cable in
the lock and secure with the cable tie,
then trim the tie.
11
12.
2
2
Check that the brake pads move away
from the rim su iciently (1–2 mm) when
the brake lever is released. The distance
of the brake pads can be adjusted by
tightening or loosening the brake cable
anchor bolt (1). If the brake pads come
into contact with the rim while the wheel
spins, adjust the spacing of the brake
arms symmetrically with the tensioning
bolts (2).
13.b
1
2
14.
Adjusting the bowden cables
Adjust the position of the cables and
make sure they do not extend outside
the frame of the scooter and that they
do not break while bending (especially
in the rear fork area).
EN