Duronic BPS Manual De Instrucciones página 7

Note: You will need to find suitable raw plugs and screws for your type of
wall.
Insert screws into the raw plugs and tighten in place.
d.
Lift the projector screen into place, hooking the screen onto the
e.
screws.
Check to make sure the screen is level on the wall.
f.
The screen can be stored away by rolling it back up and using the rip-tape
fasteners (provided) to hold it together.
If the screen gathers dust, simply clean with a dry cloth or duster.
The screen is made of PVC. If the screen has a mark or stain that needs to
be removed, use a wet cloth with a mild soap to gently clean the screen. Use
minimal pressure to prevent damaging the fabric.
Do not use any abrasive chemicals or cleaning agents on any part of the
screen.
Cleaning
7