Before You Begin - Duronic BPS Manual De Instrucciones

• Remove all packaging and set aside.
• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
Wall Mounted:
Using the hooks on the top of the screen to guide
you, hold the screen up onto the wall where you
wish to install it and mark the two places where
you need to put the screws.
a. Use a spirit level to check that the screen
will be level and straight on the wall.
b. Set the screen aside.
c. Use a drill to make two holes in the places
you marked, ensuring they are the same
size to correspond with your raw plugs.
Then insert raw plugs.

Before You Begin

Assembly Instructions
6