Casio CDP-200R Guia Del Usuario página 23

CDP200R_e.book 21 ページ ２００８年４月２１日 月曜日 午後３時４分
Editing Sampled Drum Set Sounds
You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.
1.
bt
Press and then use
tone number (676, 677, or 678) for the drum set
you want.
2.
6
Press .
3.
7
Press .
S m
Flashes at high speed
This is the editing mode.
• While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
which is described below). Pressing
editing mode and returns to step 2 of this procedure.
Indicates keyboard keys that have sounds assigned.
■ To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.
Example: To copy sampled sound of key C3 to key D3
Indicates the keyboard key whose sound was copied.
• A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.
All manuals and user guides at all-guides.com
Sampling Sounds and Playing Them on the Digital Piano
cl
(10-key) to enter the
l D r m 1
p
7
again exits the
■ To change the pitch of a sampled sound
While holding down the keyboard key of the sampled sound
whose pitch you want to change, use the
[+] keys to change the pitch.
• You can change the pitch within a range of –64 to 63
semitones.
■ To delete a keyboard key's sampled sound
While holding down the keyboard key whose sound you want
bs
to delete, press . In response to the "DelSure?" message
cl
that appears, press the (10-key) [+] button to delete, or [–]
to cancel the delete operation.
• Deleting a sampled sound will return the key to its initial
default built-in sound.
Example: To delete the sound assigned to key D3
Disappears
Using a Drum Sampling Tone in Auto
Accompaniment
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.
1.
bs cl
Press and then use
rhythm number of the Auto Accompaniment
pattern you want.
You cannot use a Drum Sampling Tone in a user rhythm,
so do not select a user rhythm in the above step.
2. bt cl
Press and then use
tone number of the sampling drum set that
contains the sound you want to use.
3.
bt
Press .
This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
• To change the Auto Accompaniment rhythm part back
to its original sound, press
• Some rhythm part drum sounds cannot be replaced by
sampled sounds.
cl
(10-key) [–] and
(10-key) to enter the
(10-key) to enter the
bt
again.
E-21