To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio CDP-200R Guia Del Usuario

CDP200R_e.book 45 ページ ２００８年４月２１日 月曜日 午後３時４分
To save a setup to registration
memory
1. bs
Press .
Bank number
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3.
cm
Press to select the bank you want.
cm
Each press of cycles through the bank numbers.
Bank 4
• You also can select a bank by holding down
cl
use the (10-key) number buttons to enter a bank
number.
4.
cr
While holding down
cq
to to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Stored in Setup 4-1
S t o r e
All manuals and user guides at all-guides.com
Lights
cm
as you
cn
, press a button from
Saving Keyboard Setups to Registration Memory
To recall a setup from registration
memory
1. cm
Press to select the bank that contains the
setup you want to recall.
2. cn cq
Use buttons to
setup you want to recall.
This will recall the registration memory setup and
automatically configure the piano settings accordingly.
Setup 6-1 recalled
R e c a l l
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-15). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in registration memory will be
deleted.
Bank 6
to select the area whose
E-45