Casio CDP-200R Guia Del Usuario página 44

CDP200R_e.book 42 ページ ２００８年４月２１日 月曜日 午後３時４分
Editing Auto Accompaniment Patterns
3.
bk
Press a button from
Accompaniment Pattern you want to edit.
The name of the pattern will appear on the display.
D r m : R h
bm
Variation selected
Pattern selected by each button
bk
: Intro
bl
: Normal, Normal Fill-in
(Each press toggles the selection.)
bm
: Variation, Variation Fill-in
(Each press toggles the selection.)
bn
: Ending
4.
bp
Press to select the instrument part you want
to edit.
The part number of the part you select will flash on the
display.
Parts that contain data. Flashing: Part selected for editing.
5.
bs
Press .
This will display the rhythm number.
6.
cl
Use the (10-key) [–] and [+] keys to select the
rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
bo
number by pressing .
• All of the eight instrument parts of an intro (I-1 to 8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
E-42
All manuals and user guides at all-guides.com
bn
to to select the
.
y
Part 6 (Chord 3)
7.
To edit the other contents, press
the screen for the setting you want.
7
• Each press of will cycle through the settings shown
below, from 1 through 6.
cl
• Use the (10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
bo
pressing .
Setting Type
1 Part on/off
2 Tone number*
3 Volume level
Left-right speaker balance
4
(panning)
5 Reverb depth (reverb send) Rvb
6 Chorus depth (chorus send) Cho.
* Instrument parts 1 and 2 can be assigned drum set tones
(built-in tones 654 to 670) only.
8.
Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
9.
Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
you want (intro through ending).
10.
4
Press .
This will display a message asking if you want to save the
user rhythm.
7
to display
Display Settings
Part On/Off
Tone 001 - 653
Vol. 000 - 127
Pan –63 - 0 - 64
000 - 127
000 - 127