Declaration Of Conformity - Elma 27.10.0 Manual Del Usuario

- Use gloves to avoid accidental burns.
- Protect yourself from burns by wearing suitable clothing covering the entire body,
especially the limbs.
- Ensure that the workplace has enough ventilation and if not, make use of forced
ventilation/aspiration. Important: never use currents of compressed air or
oxygen.
- Once you have finished using the device close the gas regulator and the outlet
valve on the gas cylinder.
04. MANTEINANCE AND WARNINGS
MANTEINANCE REGULATIONS:
the device to cool down before cleaning or performing maintenance tasks.
INFORMATION:
Udom S.A. directly
REPLACEMENT PARTS:
rised and approved by Udom S.A. may be used. We recommend that damaged
components or parts be replaced immediately to guarantee better operation,
energy savings and even the prevention of more serious breakdowns in the
blowtorch.
STORAGE:
it is important to store the device in a cool, dry place, away from
aggressive chemical products or heat sources.
REQUEST FOR SUPPORT:
after careful analysis (detection of breakdowns and possible causes). In the
event of a written request, we advise you specify the following terms: Machine
type, Reference number, Detailed description of the fault, Tests you have
carried out and Adjustments made and their effects.

05. DECLARATION OF CONFORMITY

UDOM S.A. declares that the product with reference 27.10.0 and description
"Blowtorch" complies with the following CE mark requirements:
EN 521:2006 (GAD 2009/142/EC)
for any type of maintenance, revision or repair contact with
or the distributor where you adquired the product.
only ORIGINAL REPLACEMENT PARTS autho-
requests for technical support must be made
always turn off, disconnect and wait for
English
7