Utilization And Functioning; Product Description; Assembly; Operation - Kunft KHH3607 Manual De Instrucciones

2. utIlIzatIoN aND

2.1. Product Description

1. Power switch and middle tube switch.
2. lower tube power switch.
3. upper tube switch.
4. Turning switch.
5. upper lid.
6. lattice net.
7. Halogen heating Tube.
8. Reflector.
9. lattice net.
10. Grill.
11. Body frame.
12. Base plate.
13. Handle.
14. Power cord and plug.
15. Butterfly nuts.
16. Tip-over safety switch.
17. Power cord guide

2.2. assembly

Follow the instructions for assembly. Remove butterfly nuts from the
base.
1) Pull the power cord through the base plate and place the cord
through the cable channel to ensure that it is secure.
2) Ensure that the base plate is firmly in position and then gently
screw the butterfly nuts into position and secure firmly.

2.3. operation

1) Insert plug into socket.
2) Set the power supply switch (orange color) to the "on" position.
This will enable the upper and middle heating tube to start. To
control the other tubes use switches 2 and 3.
3) To allow the heater to oscillate please press the 'Turn' button.
Irradiador-KHH3607-Manual-3.indd 8
fuNctIoNING
8
17/06/30 16:25