Twin-Star International 18DF2433 Instrucciones De Ensamblado página 5

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Locate the Left Front Panel (B), Right Front Panel
(C), Center Front Panel (D), and set out face down
on a scratch-free surface.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Push the Left Front Panel and Right Front Panel
snug to the Center Front Panel. Make sure the Wood
Dowels are seated in the pre-drilled holes.
Connect the Left Front Panel (B), Right Front Panel
(C) and Center Front Panel (D) with Connection
Plate, tighten Screws (DD) through the pre-drilled
holes.
Hardware Used
CC Wood Dowel
DD Screw
2. Locate Hearth/Base (A) and set out finished side up
on the floor.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Attach the completed Front panel assembly from
step 1 to the Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in the
Hearth/Base.
Hardware Used
CC Wood Dowel
All manuals and user guides at all-guides.com
x 4
x 2
x 4
4
Fig. 1
D
CC
DD
C
Fig. 2
CC
CC
B
CC
A