Kohler K-1001-H2 Diagrama De Instalación página 2

25" (63.5cm)
PUMP
OUTLET
Product Information
Applicable product:
Pump kit for the tower
Pump kit for the Waterfall
Accessories/hardware:
10-jet tower
Waterfall kit
Custom drain
Fixture:
Weight
Pump HP
Variable 2
Speed
Required Electrical Services (2 required)
Two dedicated 240 V electrical circuits required, one for the
pump/control and one for the heater, each protected with a
Class A Ground-Fault Circuit-Interrupter (GFCI) or
Earth-Leakage Circuit-Breaker (ELCB):
Pump/control 220-240 V, 20A, 50/60 Hz
Heater 220-240 V, 20 A, 50/60 Hz, 4 Kw
1030200-1-A
10-1/2" (26.7cm)
4-5/8"
(11.7cm)
K-1001-H2 shown
K-1003-H2 not shown
K-1000-H2 Required
K-1002-H2 Required
K-7179 Recommended
60 lbs. (27kg)
Voltage Frequency Amperage
220-240 V 50/60 Hz 18 A
11"
(27.9cm)
4-3/8"
(11.1cm)
SUCTION
Notes
Refer to the installation instructions included with this fixture
before beginning installation.
For use with the K-1000-H2 or K-1002-H2 only.
For indoor use only.
Locate the keypad within reach of the control box. An 8' (2.4m)
cable is included.
The pump kit includes the fittings.
Two dedicated 240 V electrical services are required; one for the
pump/control, and another for the heater.
2
19-1/4" (48.9cm)
13" (33cm)
5-1/2" (14cm)
PUMP
OUTLET
PUMP INLET
13"
(33cm)
Kohler Co.