Sartorius YBT01 Instrucciones De Funcionamiento página 27

Note:
If more than one device is detected with the
same name, the devices cannot be unambigu-
ously identified from the device names. For
clear identification, you need to check the
Device Properties for the device address and
compare this number with the ID numbers
printed on each device. The ID number of the
YBT01 is printed on the manufacturer's ID
label, with is affixed to the bottom of the
device. The ID number of the YDO01C-BT
(Option B) is printed on the manufacturer's ID
label affixed below the antenna connector
(see "Installing the YDO01C-BT (Option B2)"
in this manual for details).
§ Select the device you wish to identify (by
clicking on it) and then press the mouse but-
ton on the right ("right-click"); this opens a
device-specific menu ("popup menu").
§ Select the "Properties" menu item.
> The "<Device Name> Properties" window
opens.
> The identification number is shown here as
the "Device Address" in hexadecimal code.
§ Click on [OK] to close the "<Device> Proper-
ties" window.
27