CHARGING
Fully charge the battery before first use. To charge the battery:
1) Connect the USB Type-C cable to the charging port.
2) The charging speed depends on the adapter used. It is suggested to use an
adapter with at least 5V/2A to fully charge both massage devices in approximately
3 hours.
3) During charging, the LED light battery indicator flashes in green slowly. When the
green light stops flashing, the device is fully charged.
4) The LED light battery indicator shows the battery level of A1:
- Red: 0-10%
- Green: 10-100%
PREPARATION (SLEEVE)
1) Please choose the right sleeve first
3) Aligns calf with the
upper part of A1
5) Follows the same procedures for the left sleeve
2) Wraps the bands around the heel
4) Wraps at the ankle first, and then the calf. Uses the
Velcro straps to adjust the tightness.
EN
3