Alarms Log
Alarms Log contains the last 50 alarms events detected by the controller. Each new alarm higher than this number will take
automatically the place of the oldest memorized. The read-out is ordered from oldest (01) to newest (50).
To read Alarms Log list proceed as follow:
1.
Enter the "FUNCTION MENU" (Push
2.
Select "ALOG" function using
3.
Push
button to display the Alarms Log:
-
-
-
4.
Quit by using the
N.B.: Alarms Log can be erased only with password.
Cod. 710.0145.40.11 Rev01 – 01.2013
button)
and
.
Lower display will show the code of an alarm.
Upper display will show the progressive number of the same alarm.
Scroll all alarms contained using
button or wait automatically quit.
and
.
15 - 271