Sanyo DS27910 Manual Del Propietário página 6

MULTIMEDIA REMOTE CONTROL KEYS
Point towards TV
VCR TV
AUX
RACKING
Mode Keys
Use these keys to program the remote control and to
select the operating mode (VCR, TV, DVD, or AUX ).
Input / TV•VCR Key—In the TV, DVD, Cable, and
Satellite modes, this key selects the program source to
display on the screen (TV signal or signal from equip-
ment connected to the A / V jacks). In the VCR mode,
this key functions as a VCR's TV/ VCR key.
Number Keys
Two keys must be pressed to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the
1 key until C1–– appears. Then press the other two
numbers.
Caption Key (See page 18.)
6
DVD
11
12
13
14
15
16
V-Guide Key (See pages 15 ~ 17.)
Menu / Guide Key—Use this key with the
and / keys to navigate and adjust features of the
on-screen menu system (see pages 10 ~ 12). Use it to
display the Satellite Guide in the Satellite mode.
Channel (CH) Scanning (
Volume ( / ) Keys
Press to scan through the channels in memory
and to adjust the volume.
Mute Key
Press once to turn off the volume. Press again to
restore.
Note: When using the audio out jacks this key will not
mute the sound in the fixed mode, but will mute the
sound in the variable mode.
VCR/DVD Keys
These keys control DVD and/or VCR functions for
Fast Forward ( ), Rewind (
(Rec), Stop ( ), Tracking (– / +), and Pause functions.
Reset Key
Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. (See page 13.)
11
Power Key
Press to turn TV on or off.
12
Sleep Key
Use this key with the "0" key to set the Sleep Timer
(see page 17).
13
Enter Key—Satellite operation only.
14
Recall Key
Select a channel then select another channel using the
number keys. Press Recall to switch between the
channels.
15
Display Key
Press once to display the channel number and time.
Press twice to display the channel number
continuously. Press again to remove the display.
16
Light Key—Press to backlight the keypad. Keys will
remain lit for a few seconds after releasing the key.
/
/ ) and
), Play ( ), Record