Rear Panel; Multimedia Remote Control - Sanyo DS27910 Manual Del Propietário

REAR PANEL

Audio Output Jacks (Fixed/Variable)
Connect external audio
equipment here (see page 13).
AUDIO VIDEO INPUT AUDIO VIDEO INPUT
AUDIO AUDIO
OUTPUT OUTPUT
AV2 AV2 AV1 AV1
VIDEO VIDEO
(MON0)
L
L L
(MON0)
AUDIO AUDIO
R
R R
Audio /Video Input Jacks (AV2)
Connect other external video equip-
ment here (see page 14).

MULTIMEDIA REMOTE CONTROL

Operates your TV, VCR, DVD, Cable Converter Box, and Satellite Receiver. Simply program
it according to the directions on pages 7~9. Then press the proper function key (VCR, TV,
DVD, AUX) to set the remote control to operate each product. The AUX mode can be pro-
grammed to operate a Satellite Receiver, VCR, DVD, or Cable Box. Also, this remote offers
large Channel, Volume, Power, and Light keys that glow-in-the-dark. It has Function keys
that light and a keypad that lights when the Light key or other related keys are pressed.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
+
/ signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak and
cause damage.
Audio/Video Input Jacks (AV1)
Connect external video equipment
here (see page 14).
UHF/VHF/CATV
75Ω
S-VIDEO S-VIDEO
INPUT INPUT
AV1 AV1
AV2 AV2
S-Video (Super-Video) AV2 Terminal
To enhance video detail use the S-Video
AV2 jack instead of the AV2 Video jack,
if available on your external video equip-
ment. (S-Video AV2 connection will
override a Video 2 connection.)
Cable / Antenna Input
Terminal (75 ohms)
S-Video (Super-Video) AV1 Terminal
To enhance video detail use the S-Video
AV1 jack instead of the AV1 Video jack,
if available on your external video equip-
ment. (S-Video AV1 connection will
override a Video 1 connection.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
See pages 13 and 14
before connecting
external audio/video
equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
Need help?
visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
5