ASROCK ConRoe945G-DV Manual Del Usuario página 14

Tabla de contenido

Idiomas disponibles

All manuals and user guides at all-guides.com

2.4 Expansion Slots (PCI, HDMR and PCI Express Slots)

There are 2 PCI slots, 1 HDMR slot and 2 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

HDMR slot: HDMR slot is used to insert a HDMR card (optional) with v.92 Modem

functionality. The HDMR slot is shared with PCI2 slot.

PCIE Slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards or ASRock DVI Graphics-SI card.

PCIE2 (PCIE x1 slot) is used for PCI Express cards with x1 lane

width cards, such as Gigabit LAN card, SATA2 card, etc.

1. If you install the add-on PCI Express VGA card to PCIE1 (PCIE x16 slot),

the onboard VGA will be disabled. If you install the add-on PCI Express

VGA card to PCIE1 (PCIE x16 slot) and adjust the "Internal Graphics

Mode Select" BIOS option to [Enabled], the onboard VGA will be enabled,

and the primary screen will be onboard VGA.

2. You can only choose either PCI Express VGA card or DVI Graphics-SI

card to install to PCIE1 (PCIE x16 slot).

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

2.5 DVI Graphics-SI Card Installation Guide

With the onboard VGA/D-Sub output and the external installation of our DVI Graphics-

SI card, this motherboard provides users with dual VGA output support: DVI-D and D-

Sub. You can easily enjoy the benefits of dual VGA output support by connecting the

D-Sub input monitor to the VGA/D-Sub port on the I/O panel and connecting the DVI-

D input monitor to our DVI Graphics-SI card inserted to PCIE1 (PCIE x16 slot) on this

motherboard. Please refer to the below procedures for proper installation of DVI

Graphics-SI card.

1 4

ASRock ConRoe945G-DVI Motherboard

Tabla de Contenido

Tabla de contenido