Remote Control Unit; The Control Panel - Maytronics M5 Manual Del Usuario

REMOTE CONTROL UNIT

The remote control unit
offers two operation modes –
Automatic mode and manual
direction control mode.
In automatic mode, the
cleaning parameters can be
changed.
In manual direction mode,
the robot's motion can be
controlled manually.
Manual Direction Control Mode
1. Press the On/Off button once. The remote control will start in
2. Use the direction control arrows (see right) to control the
Exiting Manual Direction Control Mode and setting the Automatic Mode
1. To exit the manual direction control mode, press the
2. The digital screen will light up and three rows of function
1. To change the parameters press the up or down arrows.
2. To select the parameter settings use the right or left arrows.

The Control Panel

manual direction control mode.
movement of the robot around the pool.
Manual/Automatic select button once only.
icons will be displayed in default mode.
When you reach the required function press the Set/OK
button.
1
Radio reception meter
When no black lines are showing, move
closer to the power supply unit
Battery level meter
When flashing, change the batteries
Manual control indicator
When flashing, you are in manual direction
control mode
Cleaning cycle icons
Delay timer icons
Cleaning mode icons
ON/OFF button
Manual/automatic select button
Set/OK button
Direction control arrows
EN