Maytronics M5 Manual Del Usuario página 4

Press the Manual/Automatic select button and then choose the desired parameters according to the
following table:
Cleaning cycle Fast
indicator
This determines
the length of the
cleaning cycle.
Supreme / 1.5-hour cycle
M family
Residential 2-hour cycle
cleaners
Commercial 4-hour cycle
cleaners
Delay time Immediate start
indicator (Default setting)
This determines
when the pool
cleaner starts to
work. Delaying
allows the dirt
to settle to the
bottom of the
pool.
Cleaning action Standard
indicator Floor and wall
Allowing you to cleaning.
choose from the (Default setting)
following options.
Note:
• After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will
continue to work in the previous settings.
• When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default
settings.
Efficient Extra
(Default setting)
2.5-hour cycle for 3.5-hour cycle
everyday use.
3-hour cycle for 4-hour cycle
everyday use.
6-hour cycle for 8-hour cycle
everyday use.
One-hour delay Two-hour delay
Ultra-clean Floor only
Stronger suction Cleans only the
and slower floor and the area
movement. where the floor and
(floor and wall) walls meet
2
Walls only
Cleans walls and
waterline only
(Except Dolphin
2x2 model)