English - IKEA LOTS Manual Del Usuario

English

Self-adhesive mirror
Note: The surface can be damaged when removing
mirror tiles from the wall.
1. The mirror fix to most surfaces which are even.
2. Fixing mirror to ceilings and sloping ceilings is
not recommended.
3. The mirror can be used in bathrooms, but
should not be fixed where they come into direct
contact with water, since water may damage
the adhesive.
4. On porous surfaces like plywood and
fibreboard, adhesion can be improved if the
surface is first coated with high-gloss lacquer.
5. Wipe the wall surface so that it is clean and dry
before fixing the mirror.
6. Wipe the back of the mirror so that it is clean
and dry before sticking the tape on it.
7. Position and fix the tape according to the
illustration in the assembly instruction.
8. Remember to position and fix the mirror
correctly from the start since the tape cannot
be reused.
3