English - IKEA BEKANT Serie Manual De Instrucciones

English

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Translated from the original instructions.
Advice and instructions for BEKANT sit/stand desk.
Sound level: lower than 55 dB(A)
Height setting interval:
EUversion: 64-125 cm
NAversion: 57,4-122,4
Maximum load: 70 kg
Temperature interval at usage:
+5 up to +40 degrees C
Temperature interval at storage:
-10 up to +50 degrees C
Humidity: 20% up to 80% at +30 degrees C.
Power supply unit: DC 29V, 200W / 220W (JP)
Manufacturer: ROL ERGO
Model:
ASW05792902002W /
ASW064329020002W (JP)
This appliance shall only be used together with the
included power supply unit
Every person who is responsible for this table at
installation or employment of the table in daily use or
in service and repair work should carefully read these
instructions. Keep these instructions close to your sit/
stand table.
Installation instructions
• The table is assembled according to separate
assembly instructions.
• Connect the cable from one leg to the other.
Connect the hand control to one of the leg and the
powersupply to the other leg. The cables to the legs,
hand control and power supply should be placed in
the accompanying net. Place the electrical cables
so that they do not get damaged, see assembly
instruction.
• Connect the electrical cable to a wall socket. NB! The
electrical cable must have full mobility.
• Insert the safety key in the socket on the hand
control.
• The table is now ready for use. The motors stop
automatically when the table reaches its lowest and
highest position respectively.
4
Usage of the table
• The table shall only be used as a working table with
the possibility to continuously adjust working height
between sitting and standing position. The table
shall only be used indoors and in dry premises (office
environment or similar).
• The table must not be overloaded maximum load is
70 kg/154 lbs. The motors may be run continuously
for maximum 1 minutes. Afterward, the motors must
stand by for approx. 9 minutes before they can be
used again.
Follow these instructions when adjusting table
height:
1. Insert the safety key in the socket on the hand
control.
2. Make sure no objects are in the way of the table
adjusting height freely.
3. In order to run the table up/down, press the
manoeuvre button with an arrow pointing up and
down respectively.
Safety regulations
• When the table is run up/down, keep the necessary
safety distance to avoid the risk to get squeezed
between the moving table top and fixed objects in
the surrounding area.
• When the table is run up/down the user shall keep
watch so that nobody is injured or no object is
damaged. The table top must not bump into a fixed
object so that the table is overturned. Always remove
any office chair before the table is run up/down.
• When the table is left unattended, the safety key
must be removed from the hand control and placed
out of reach of children.
• The table tripod must not be altered or reconstructed
in any way. In service and repair work of the table,
the electrical cable must always be disconnected
from the wall socket.
• Alterations to the control box are absolutely
forbidden!
• The table must not be used as a hoisting device for
persons.