English
You may register your product online at http://www.sandisk.com/registration
Failure to register your product will not diminish the rights you have under the product warranty
Disposal Instructions: Do not dispose of this device with unsorted household waste. Improper disposal may be harmful to the environment
and human health. Please refer to your local waste authority for information on return and collection systems in your area.
SYSTEM REQUIREMENTS
Connection
•
USB 2.0 port required for Hi-Speed transfer
Minimum Operating System Support
•
PC or Macintosh computer with USB support
•
Windows 2000, XP, or Vista operating system
•
Mac OS X v10.1.2+
CONNECTING
Connecting the MicroMate Reader/Writer to the USB port is simple. Plug the MicroMate Reader/Writer into the computer directly.
Windows Disk Icons: When you connect the MicroMate Reader/Writer on a Windows operating system, a newly assigned removable disk
icon drive letter representing the MicroMate Reader/Writer will be shown in My Computer.
Macintosh Disk Icons: When you connect the MicroMate Reader/Writer on a Macintosh operating system, a removable disk icon labeled
"untitled" representing the MicroMate Reader/Writer will show on the desktop when a card is inserted.
USING
Inserting Cards
The card is inserted with its label facing in the same direction as the Reader/Writer side with the SanDisk logo. DO NOT force the card into
the slot.
LED Activity
The LED indicator turns on after a card is inserted correctly AND the MicroMate Reader/Writer is connected correctly to the USB port on the
PC. The LED indicator is blinking when data is being transferred from or to the card. To avoid losing data or corrupting the card, NEVER
remove the card or disconnect the MicroMate USB 2.0 Reader/Writer when the ACTIVITY LED is FLASHING or BLINKING.
Removing Card
To remove the card in Windows:
1.
Double click on the icon "My Computer" and Right-click on the corresponding MicroMate Reader/Writer drive icon
2.
Select Eject (this is not needed for XP)
3.
Pull the card out of the slot
To remove the card on a Macintosh:
1.
Drag the "untitled" icon into the Trash
2.
Pull the card out of the slot
Disconnecting
To avoid losing data or corrupting the card you should NEVER remove the device from the USB port without first reading the steps below.
Windows:
Use the hotplug icon in the notification area of the taskbar to safely eject the device.
These steps are not required for XP.
1. In the notification area, right-click on the hotplug icon.
2. Select the device you want to unplug then click STOP.
3. When Windows notifies that it is safe to do so, unplug the MicroMate Reader/Writer from the computer.
Macintosh:
1.
Drag the MicroMate Reader/Writer "untitled" icon into the Trash.
2.
Unplug the device.
Troubleshooting
For Frequently Asked Questions on error messages please go to our website at http://www.sandisk.com/retail/support.asp
For assistance by phone please call toll free 866-SANDISK (866-726-3475), 7 days a week.
All manuals and user guides at all-guides.com
2
LIMITED WARRANTY
SanDisk warrants that this product will be free from material defects in design and manufacture and will substantially conform to the
published specifications under normal use for two years from your date of purchase, subject to the conditions below. This warranty is
provided to the original end user purchasing from SanDisk or an authorized reseller, and is not transferable. Proof of purchase may be
required. This product must be used with memory cards that are compliant with the specifications of the SD Card Association or Memory
Stick Duo and/or Memory Stick PRO Duo requirements as applicable; use with any other product voids this warranty. SanDisk is not
responsible for any failure or defect caused by any third party product or component, whether authorized or not. This warranty does not
apply to any third party software provided with the product and you are responsible for all service and repair needed for such software.
This warranty is void if the memory card is not used in accordance with the product instructions, or if it is damaged as a result of improper
installation, misuse, unauthorized repair, modification or accident.
To obtain warranty service contact SanDisk at 1-866-SanDisk or send an email to: support@SanDisk.com. You must return the product in
tamper resistant packaging, freight prepaid, as instructed by SanDisk. You must obtain a tracking confirmation number, which you may be
required to provide to SanDisk. SanDisk will, at its option, repair or replace the product with new or refurbished product of equal or greater
capacity and functionality, or refund the purchase price. The warranty duration on replaced product will be that time period remaining on
the original product. THIS CONSTITUTES SANDISK'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR BREACH OF THIS
WARRANTY.
SanDisk does not warrant, and shall not be responsible for, any lost data or images contained in any product (including in any returned
product), regardless of the cause of the loss. SanDisk's products are not warranted to operate without failure. SanDisk products should not
be used in life support systems or other applications where failure could threaten injury or life. This warranty gives you specific legal rights,
and you may also have other rights which vary by jurisdiction.
THE FOREGOING IS SANDISK'S SOLE WARRANTY. SANDISK DISCLAIMS ALL OTHER EXPRESS AND IMPLIED WARRANTIES TO THE
FULLEST EXTENT PERMITTED BY APPLICABLE LAW. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE EXPRESS WARRANTY. SOME JURIDSICTIONS DO NOT ALLOW
LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT
SHALL SANDISK OR ANY AFFILIATED OR SUBSIDIARY COMPANY BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY DIRECT,
INDIRECT, OR CONSEQUENTIAL DAMAGES, ANY FINANCIAL LOSS OR ANY LOST DATA OR IMAGE, EVEN IF SANDISK HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT
WILL SANDISK'S LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The information in this manual is subject to change without notice. SanDisk shall not be liable for technical or editorial errors or omissions
contained herein, nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. This
documentation may not be copied, reproduced, translated or reduced to any electronic medium, in whole or in part, without prior written
permission from SanDisk.
Deutsch
Sie können Ihr Produkt online unter folgender Adresse registrieren: http://www.sandisk.com/registration.
Sie verlieren keinerlei Rechte, die Ihnen im Rahmen der Produktgarantie zustehen, falls Sie die Registrierung nicht durchführen.
Anweisungen für die Entsorgung: Dieses Gerät darf nicht mit unsortiertem Hausmüll entsorgt werden. Eine unangemessene Entsorgung
kann zu Umweltschäden und Gefahren für die Gesundheit führen. Bitte beachten Sie die Hinweise der für Ihren Ort zuständigen Behörden
zu Rückgabe- und Sammelverfahren.
SYSTEMANFORDERUNGEN
Verbindung
•
USB 2.0-Anschluss erforderlich für höchste Übertragungsgeschwindigkeit
Unterstützt die folgenden Betriebssysteme
•
PC oder Macintosh-Computer mit USB-Anschluss
•
Betriebssystem: Windows 2000, XP oder Vista
•
Mac OS X v10.1.2+
VERBINDEN
Der MicroMate Reader/Writer kann problemlos an einen USB-Anschluss angeschlossen werden. Stecken Sie den MicroMate Reader/Writer
direkt in den entsprechenden Anschluss des Computers.
Windows-Datenträgersymbole: Beim Anschließen des MicroMate Reader/Writer unter einem Windows-Betriebssystem erscheint ein
neues Datenträgersymbol. Dieses Symbol, das den MicroMate Reader/Writer als austauschbaren Datenträger identifiziert, wird unter
„Arbeitsplatz" angezeigt.
Macintosh-Datenträgersymbole: Wenn Sie den MicroMate Reader/Writer unter einem Macintosh-Betriebssystem anschließen, wird auf
dem Schreibtisch ein Symbol für einen austauschbaren Datenträger mit der Bezeichnung „Ohne Titel" angezeigt, sobald Sie eine Karte in
den MicroMate Reader/Writer einschieben.
3