Features - Sanyo VCC-XZ600N Manual De Instalación

Features

Zooming Function
b You can store the zoom and focus
settings of surveillance locations by
camera setting number.
&
[CAMERA] ⇒ [POSITION]
CAMERA 1
POSITION POSITION POSITION
x 1.0 SET y
b The electronic zooming function can be
used to zoom in the object at the
magnification power higher than that in
the optical zoom.
&
[LENS] ⇒ [ZOOM] ⇒ [EL ZOOM]
b You can change the zooming speed.
&
[LENS] ⇒ [ZOOM] ⇒ [SPEED]
Remote Operations
b The camera can be controlled remotely
by establishing the network
communication.
&
[OPTION] ⇒ [NETWORK]
b You can switch the viewing mode
manually between the color mode and
the black/white mode.
&
[CAMERA] ⇒ [COLOR] ⇒
[EXT ALARM]
Camera Title
You can set and display the camera title.
This helps you confirm from which camera
the image is sent when multiple cameras
are connected. (Maximum 16 characters)
&
[OPTION] ⇒ [DISPLAY] ⇒ [TITLE]
ROOM1
ROOM1 ROOM2
&
CAMERA 2
POSITION POSITION POSITION
x 3.0 x 3.0 x 3.0 SET y
ROOM2
You can perform the settings on the camera by
navigating through the menu screens.
Alarm Settings
b The camera has a built-in motion sensor.
&
[CAMERA] ⇒ [MOTION] ⇒ [ON]
Not detected
b The alarm condition can be detected by
connecting door switches or infrared
sensors.
&
[ALARM] ⇒ [ALARM IN]
Alarm Notice
b The camera title you specified in the
[OPTION] menu blinks to notify that the
alarm condition is detected.
&
[ALARM] ⇒ [ALARM DISPLAY]
b When the alarm condition is detected,
the object on the screen is zoomed in.
&
[ALARM] ⇒ [ALARM IN] ⇒
[ACTION] ⇒ [ZOOM]
b A buzzer or lamp can be used to notify
you of detection of alarm when you are in
a distant place from the monitor.
&
[ALARM] ⇒ [ALARM OUT]
11
Detected
DOOR1 DOOR1 DOOR1