Fuse Replacement - Rangemaster RM51000 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Controls
The hood is operated using the slide controls
under the bottom of the hood.
The light switch turns the lamps on and off.
The blower switch :makes it possible to
select the motor operating speed. Position 0:
motor off.
The pilot lamp lights up whenever the blower
is on.
HALOGEN BULBS
This range hood requires two halogen bulbs
(Type T4, 12V, 20W).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Loosen the ring nut by turning it
counterclockwise.
2. Remove the bulb by pulling sideward(DO
NOT ROTATE). CAUTION: BULB MAY BE
HOT!
3. Replace with Type T4, 12V, 20W halogen
bulb. Do not touch replacement bulb with
bare hands!

FUSE REPLACEMENT

SWITCH OFF THE ELECTRICITY SUPPLY.
Remove the decorative flue.
Open the fuse box.
Replace with the same type of fuse (5x20mm,
4A, 125V).
All manuals and user guides at all-guides.com
- 10 -
LIGHT
SWITCH
PILOT
LAMP
DECORATIVE
FLUE
FUSE
BLOWER
SWITCH
RING NUT
FUSE
BOX

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rm52000 serie

Tabla de contenido