Hardware Contents - Sunjoy L-GG030PST-B Instrucciones De Montaje

HARDWARE CONTENTS

AA
M6 x 20 mm
Screw
Qty. 80+8
WARNING
• This product is intended for outdoor use only and should be placed on flat, horizontal ground.
• Ensure enough clearance around the product.
• Before assembling the product, find level ground no less than 6 ft. away from any structures or
obstructions, such as fences, garages, houses, overhanging branches, laundry lines, or electrical wires.
• The gazebo must be anchored with stakes onto the ground for added safety.
• It cannot be permanently attached to a concrete floor or platform.
• Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have enough anchorage
in these types of soil.
• This product is for outdoor use only! Do not climb on top of the gazebo! Do not use the unit during an
electrical storm!
CAUTIONS
• Any assembly or maintenance of the product must be carried out by adults only.
• Arrange 6 or more manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Check all nuts and bolts periodically for tightness. When required, tighten them again.
• Do not hang any weights on the roof frame.
• Always keep children under close supervision when they are using or are around this product. Never
leave children unattended.
Hook maximum weight: 26 lbs
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly T ime: 90 minutes
Tools Required for Assembly: Wrench (included) and Phillips Screwdriver (not included).
BB CC
M6 x 15 mm
Screw
M6
Qty. 48+5
Washer
Qty. 130+13
DD II
M6 x 35 mm
Screw Φ8*240 mm
Stake
Qty. 2+1
Qty. 8
2
JJ Z
M4 x 10 mm
Screw
Qty. 32+4
M6
Wrench
Qty. 2