Assembly Instructions - Mobiclinic X-BIKE EVEREST Manual De Instrucciones

EN

5. Assembly instructions

Step 1
Pull the main support (1) out of the housing,
unfold it and align the inner adjustment tube
(25), then screw it with the ball pin (24).
Step 2
Connect the front lower tube (2), the rear
lower tube (3) to the main support (1) with
the nut (6), the curved washer (5) and the
bolt (4).
Step 3
Connect the saddle (11) to the seat tube (9)
with the washer (12), nylon nut (13); then
screw the seat support tube (26) with the
knob (10).
Step 4
Connect the backrest support (14) to the seat
tube (9) with bolt (15), washer (12), nylon nut
(13); then screw it (18) to the backrest support
(14) with bolt (19).
5