Installation Guidelines - Heylo HL 400 Manual Del Usuario

Optional filters (virus filter H14)
The unit is available with an optional H14 main filter for filtering viruses and bacteria.
In the HL 400 V model (art.no. SET072), this combination filter is already built into the unit.
The combination filter consists of a combination of 3 filters:
▪
Pre-filter G4
▪
Carbon filter
▪
HEPA H14 filter
If you have purchased the optional filter, the existing standard filters must be removed before
use.
Ionizer
The plasma generator is located inside the unit and cannot be replaced.
If crackling noises occur during operation, you should clean the head (as described in the picture)
from dust with a narrow paintbrush.
Particle sensor
For the air quality display, a sensor measures the particles in the room air. This sensor should
also be cleaned regularly.
To do this, open the side flap (Fig. 1) and carefully wipe the sensor clean with a cotton bud

8. Installation guidelines

For commercial use, the legal regulations of the respective country must be observed for the
installation and use of the HL 400 air cleaner. In Germany the following regulations, among
others, must be observed:
▪
Workplace ordinance §§ 5 and 14
▪
Workplace directive ASR 5
▪
Accident prevention regulations VBG 43
Ionizing head
Picture 1
21
Cotton swab
Picture 2
EN