Eono PL03 Instrucciones De Montaje página 7

STEP 4: Adjust Tension
tension in gas spring arm (A) using 5 mm allen key (L).
After being attached to the arm, the monitor falls down
and can not stay at the desired height by itself.
Turn counter-clockwise("+"direction) to increase gas
spring tension until the monitor can stay at the desired
height by itself.
After being attached to the arm, the monitor rises up and
can not stay at the desired height by itself.
Turn clockwise("-"direction) to reduce gas spring tension
until the monitor can stay at the desired height by itself.
L
+
If necessary, refer to above illustrations
to adjust the level of tightness of the
arms.
A
L
-
Note
Be sure to keep the arm in horizontal
position during adjustment. Or else it
would be difficult to adjust the mount.
or damage the mount.
06
CAUTION
：