Technoline WS 7024 Instrucciones De Uso página 3

Suction Cup Window Thermometer
Model No.: WS 7024
Instruction Manual
Battery Installation and °C/°F selection
(See above illustrations 1~2)
- Pull the bottom housing and battery holder away from the top housing.
Insert the battery according to the polarity markings.
-
Slide the selector switch to either Fahrenheit or Celsius.
-
Re-attach the top and bottom housings.
-
Convert from Outdoor to Indoor Use (See above illustrations 3~6)
Your suction cup thermometer is assembled for outdoor use. If you want to attach the thermometer
to the inside of the window, follow these steps;
Pull the bottom housing away from the top housing.
-
- Pull the suction cup away from the top housing.
Rotate the bottom housing and suction cup 180 degrees.
-
Push the suction cup into place.
-
- Re-attach the top and bottom housings.
Install the Thermometer
The thermometer can be mounted to a window, mirror, or nay clean and smooth, non-porous
surface. Suction cups will not hold on wood or plaster.
Clean surface of any oils or other foreign matter.
-