NISBETS ESSENTIALS HE153 Manual De Instrucciones página 4

UK
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this
machine will provide the best possible performance from your Nisbets Essentials product.
Operation
Steam vent
Pump button
Boiling indicator
Temperature button
Reboil button
Keep warm indicator
1. Lift the latch to open the lid.
2. Fill the appliance with liquid. Do not fill above the
"MAX" line.
3. Close the lid, ensuring it locks firmly in place.
4. Plug in the power cord and connect it to the
mains power supply.
5. The Boiling indicator lights up and the appliance
begins to heat.
6. Press the temperature button to set the desired
water temperature for keeping warm. (Press the
button repeatedly to toggle between 98°C/85°C
/70°C.)
Note: The appliance will take approximately 26
minutes to heat up when filled with cold water.
7. Once the correct temperature has been reached,
the Keep Warm indicator lights up and the
appliance is ready to dispense.
4
HE153_ML_A5_v1_20211014.indb 4 HE153_ML_A5_v1_20211014.indb 4
Pump button lock
Lid latch
Water Dispense
button
Lock/Unlock
button
Control panel
Spout
Water level indicator
Warning: There is a danger of scalding when
opening the lid during and after use. Take care to
avoid the expulsion of steam.
Dispense Liquid
There are 2 methods of dispensing liquid:
1. Hold a suitable receptacle beneath the spout.
2. Push the Water Dispense button to dispense the
liquid, or
Unlock the Pump button and push down
repeatedly to pump out the liquid.
Reboil
It may be necessary to reheat the water in the
appliance.
• Press the Reboil button to reboil the water.
Inner pot
Rotary base
Lid
"MAX" level
Handle
2021/10/14 13:17 2021/10/14 13:17