Maintenance And Storage; Features And Specifications - Duronic FN55 Manual De Instrucciones

THE FAN BLADE DOESN'T WORK
- Check that the power cable is plugged in and switched on.
- Check if the mesh cover is distorted and touching the fan blade.
THE FAN MAKES A NOISE WHEN STARTING
- Check that the fan blade is installed correctly and is held tightly in
place.
- Check the mesh back cover is aligned correctly with the notches on
the motor unit.
- Check if the cover has distorted in any way and that it is not touching
the fan blades.
1. Before cleaning, ensure that the fan is switched off and unplugged from the power
supply.
2. Never submerge the fan in water. To keep the fan clean, the outer shell
may be cleaned with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, wipe the unit dry by using a soft dry cloth
3. Do not use alcohol, gasoline, abrasive powders, furniture polish, or brushe s
to clean the fan as this may cause damage and deterioration to the surfac e
of the fan
.
4. Always ensure the fan is completely dry after cleaning before operating
agai n.
5. When storing away, place the fan in a protective box and store in a cool dry
place.
Model
FN55
Troubleshooting

Maintenance and Storage

Features and Specifications

Volatge
220V
Frequency
60Hz
9
.
Power
60W