KSIX Noise Cancel 2 Manual De Usuario página 3

USER GUIDE
Charging
Fully charge the case and the earphones before using them for the first time.
1. Charging the charging case
There is a Type-C cable included in the packaging. Connect it to the Type-C
charging port and the other end into a USB powered source. While charging, the
indicator light will keep flashing. Once charged, the indicator light will remain
steady.
2. Charging the earphones
Put the earphones into the charging case. While charging, the case's indicator
light will remain steady. Once the earphones are fully charged, the case's
indicator light will go o .
Pairing
1. Auto Pairing
Take the earphones out of the charging case, and then the earphones will
automatically turn on, sync together and enter pairing mode.
2. Syncing
When the earphones do not sync with each other or enter disconnected state
during use:
- Turn o both earphones and turn them on again.
- If the previous step does not work, place both earphones back into the case,
close the charging case and then open the charging case again.
- While the earphones are out of the charging case: Press and hold both
earphones for 3 seconds. This will force the earphones to turn o and on again
and sync with each other.
3. Open Bluetooth settings on your smart device and look for ANC2_KSIX.
Power on / o
1. Take the earphones out of the charging case, they will automatically turn on.
Put the earphones back to the charging case, they will automatically turn o .
2. Long press for 3 seconds to turn them on. Long press for 5 seconds to turn
them o .
Play / Pause music
When listening to music:
Tap left / right earphones once to play or pause the music.
Previous / Next Song
When listening to music:
Quick double tap left earphone to go to previous song.
Quick double tap right earphone to go to next song.