Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CPSF2 Manual Del Usuario

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

Checking for damage and the completeness of the device must be carried out upon receipt of the package.
In the event of identification of transport damage, refuse or accept the delivered product only with reservations
*. A complaint detailing the defects observed must then be made. The perception of damage is only possible
in the event of a complaint formulated within the prescribed time limits, ie 24-48 hours at most.
* written on the correct paper or digital delivery of the carrier.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock greater than 2 months (general condition of the device and all the elements constituting
it)
• No material shaking
• Storage in a closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Tanks
Dimensions
Eutectic plate
Weight
CPSF2
2 x GN 1/6 deep 200mm
L 385 x D 220 x 375 mm
W 325 x D 175 x H 45mm
8 kg
CPSF3
3 x GN 1/6 deep 200mm
W 595 x D 220 x H 375 mm
W 530 x D 160 x H 45mm
12 kg
EN