Handling And Storage - Gastrodomus SLIMW Manual De Instrucciones

1. INTRODUCTION
This appliance is manufactured in its interiors, aesthetics and components according to the specific
requirements of our customers. It has been functionally and aesthetically checked before shipment.
Please use this appliance according to the instructions given in this manual to ensure proper
operation over time.
2. MANUFACTURER'S RIGHTS AND RESPONSIBILITIES
Partial or total reproduction of these instructions is forbidden without the written authorization of
the company. The reproduced drawings are of general purpose and can differ in some details from
the delivered appliance. The manufacturer declines any responsibility for damage caused to persons
or things due to:
non-observance of warnings and instructions contained in this text;
non-compliance with the operating limits of the appliance;
improper, incorrect, unreasonable use or use by inexperienced personnel;
use not in accordance with local regulations;
unauthorized modifications and/or repairs carried out by non-qualified/authorized personnel;
use of non-original spare parts/accessories;
exceptional events.
Note: The manufacturer reserves the right to make technical and aesthetic improvements and
changes to the appliance at any time without prior notice.

3. HANDLING AND STORAGE

The appliance is wrapped in a package consisting of a wooden platform, rigid corners, polystyrene
protections and plastic film. While awaiting its final location, store it under cover, away from heat
sources and direct sunlight.
4. COMMISSIONING
Read the labels on the appliance carefully, do not cover them under any circumstances and replace
them immediately if they are damaged. Do not remove covers or panels that require tools to
remove.
Location
Make sure that the space provided for the appliance allows for its proper use and easy maintenance.
Remove all packaging from the appliance. Level the unit by screwing on the leveling feet and
adjusting them (if present). Move the appliance by lifting it only by the outer bottom, to avoid
damaging the wheels or the support feet and/or other parts of the appliance. If the appliance has
been moved horizontally, wait two hours before turning on the appliance. The appliance must not be
installed in hazardous locations, in the open air or exposed to rain, and must be kept away from heat
sources, and sunlight. Air must circulate freely through the condensing unit. Failure to comply with
the above conditions will result in reduced appliance performance.