KNF LAB LABOPORT SH820G Manual Del Usuario página 129

Vacuum system SH820G / SR820G SH840G / SR840G
11 AS hose
connection
12 HLK hose
connection
15 O-ring
16 O-ring
17 O-ring
18 O-ring
19 O-ring
20 AS hose
connector
Translation of Originial Operating Instruction, KNF 325562-325564 06/21
Change O-rings on the hose connections
1. Loosen the two union screws on the hose connections
(11) and (12) and pull the hose connections out of the
head covers (3).
If necessary, use a size 14 open-end wrench to loosen
the union screws.
11
20
Fig.16: Change O-rings
2. Change the O-rings (16) and (17) on the separator hose
connection (11).
3. For SR820G and SR840G:
Carry out step 2 also for the second separator hose con-
nection (11) on the outlet side.
3
15
16
17
19 18
Servicing
12
53
DE
EN
FR
ES
IT